( 70 / 80 )
6.1 Flowchart to Remedy the Troubles
Figure 6.1 shows the flowchart to remedy the troubles from when power to the emulator is activated
until the emulator debugger starts up. Check this while the target system is disconnected. For the latest
FAQs visit the Renesas Tool Homepage.
http://www.renesas.com/en/tools
Figure 6.1 Flowchart to remedy the troubles
Not normal
Normal
Not normal/Error displayed
Normal
Not normal/Error displayed
Normal
Turning on PC7501
Emulator debugger startup completed
1. Check the operating environment etc. of the emulator
debugger.
See the user's manual of the emulator debugger.
2. Reinstall the emulator debugger.
1. Check emulator system connections.
See, "3.5 Connecting the PC7501" (page 33).
2. Redownload the firmware.
See "4.2 Downloading Firmware" (page 48).
3. Restart the PC7501 system.
See "6.2 (3) MCU Setting Dialog Box Does Not Appear at
Debugger Startup (target not connected)" (page 73).
Init dialog box of emulator
debugger displayed
Front panel LED of PC7501
MCU Setting dialog box of
emulator debugger displayed
Error displayed
Normal
See "6.2 (4) Errors Occur at Debugger Startup (target connected)"
(page 73).
Program window of emulator
debugger displayed