Ricoh 2590 All in One Printer User Manual


 
Troubleshooting When Using the Facsimile Function
34
3
Note
If the “Check whether there are any network problems.” message ap-
pears, the machine is not correctly connected to the network or the settings of
the machine are not correct. If you do not need to connect to a network, you
can specify the setting so this message is not displayed, and then the {Facsim-
ile} key no longer lights. See “Parameter Settings”, General Settings Guide. If
you reconnect the machine to the network, be sure to set “Display” with User
Parameters.
If the paper tray runs out of paper, “
No paper. Load it. then press [Ex-
it].
” appears on the display, asking you to add more paper. If there is paper
left in the other trays, you can receive documents as usual, even if the mes-
sage appears on the display. You can turn this function on or off with “Param-
eter Setting”. See “Parameter Settings”, General Settings Guide.
Reference
“Connecting to the Ethernet Interface”, General Settings Guide
“File Transfer”, General Settings Guide
“IP-Fax Settings”, General Settings Guide
“Parameter Settings”, General Settings Guide