Ricoh 2590 All in One Printer User Manual


 
Troubleshooting When Using the Printer Function
46
4
When a Message Is Displayed
This section describes the principal messages that appear on the panel display.
If a message not described here appears, act according to the message.
Reference
Before turning the main power off, see “Turning Off the Main Power”, About
This Machine.
Status Messages
This section describes the machine status messages.
Message Problem
Ready
This is the default ready message. The machine is ready
for use. No action is required.
Printing...
The machine is printing. Wait a while.
Waiting...
The machine is waiting for the next data to print. Wait a
while.
Offline
The machine is offline. To start printing, switch the ma-
chine online by pressing [fOnline] on the display panel.
Please wait.
The machine is preparing the development unit. Wait a
while.
Resetting job...
The machine is resetting the print job. Wait until
Ready” appears on the display panel.
Setting change...
The machine is setting changing. Wait a while.
Hex Dump Mode
In the Hex Dump mode, the machine receives data in
hexadecimal format. Turn off the machine after printing,
and then turn back on.