Ricoh 270 All in One Printer User Manual


 
Replacing Photo Conductor Unit (PCU)
95
3
E Raise the green handle and slide the photo conductor unit out towards you.
Important
Do not tilt or drop the removed photo conductor unit. Moving the unit
abruptly can scatter the toner.
While the photo conductor unit is removed, do not change the toner.
F Take the new photo conductor unit from the box and remove the plastic
bag, holding the handle.
Important
Do not drop or damage the removed photo conductor unit.
Do not touch the side of the photo conductor unit.
G Put the photo conductor unit removed in step E into the plastic bag emptied
in step F, keeping the unit at the same angle as when it was installed. Then,
zip the plastic bag.
Note
Do not tilt the used PCU after Removing it from the machine. If you do,
toner might fall.
H Remove the two red sheets from the photo conductor unit in the order
shown in the illustration.