Ricoh 270 All in One Printer User Manual


 
Copying
36
2
Rotate Sort
Shift Sort
Three sorting methods are available:
Sort
Copies can be assembled as sets in
sequential order.
Rotate Sort
Every other copy set is rotated by
90
°
KL
and delivered to the copy
tray.
Shift Sort (optional finisher or shift
sort tray required)
Every other copy set is shifted for
ease of separation. The shift tray of
the finisher or shift sort tray pro-
vides this function by sliding from
side to side.
Note
To switch among Sort, Rotate Sort,
and Shift Sort modes, access the
user tools. See “6. Sort” on
P.125
“3. Input/Output 2/2”
.
The paper sizes that can be used
with the Rotate Sort function are as
follows:
To use the Rotate Sort function,
two paper trays identical in size
and different in direction (
K
L
)
are required.
The paper sizes that can be used in
Shift Sort function are as follows:
Reference
For the paper capacity of the op-
tional finisher, see
P.38
“Staple”
.
A Press the
[
Sort/Staple
]
key.
B Make sure that
[
Sort
]
is se-
lected, then press the
[
OK
]
key.
C Enter the number of copy sets
with the Number keys.
Limitation
The maximum number of sets is
99.
D Set your originals.
When setting a stack of originals
in the document feeder
A Set a stack of originals in the
document feeder, then press
the
{
Start
}
key.
Metric version A4KLB5JISKL
Inch version
8
1
/
2
"
×
11"KL
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
3
2
1
3
2
1
3
2
1
1000-sheet finisher
A3L, B4JISL, A4KL, B5JISKL, 8
1
/
2
"
×
13"L, 11"
×
17"L, 8
1
/
2
"
×
14"L, 8
1
/
2
"
×
11"KL