Ricoh 270 All in One Printer User Manual


 
129
5. Remarks
Do's and Don'ts
R
CAUTION:
Important
Make sure the remaining memory space is 100%, before you unplug the pow-
er cord.
While the machine is unplugged, you can neither send nor receive a fax.
Reference
For details, see the Facsimile Reference.
Do not touch areas on or around the fusing unit. These areas get hot.
After making copies continuously, you may feel the exposure glass is heated.
This is not a malfunction.
You may feel warm around the ventilation hole. This is caused by exhaust air,
and is not a malfunction.
Do not turn off the operation switch while copying or printing. When turning
off the operation switch, make sure that copying or printing is completed.
The machine might fail to produce good copy images if condensation forms
inside the machine due to temperature change.
Do not open the covers of the machine while copying or printing. If you do,
misfeeds might occur.
Do not move the machine while copying or printing.
If you operate the machine improperly or a failure occurs, your settings might
be lost. Be sure to take a note of your machine settings.
Supplier shall not be liable for any loss or damages resulting from a failure on
the machine, loss of machine settings, and use of the machine.
Do not touch the Allen key if it is stored in the inner front cover.
It is used by your service representative.
Unplug the power cord from the wall outlet before you move the equipment.
While moving the equipment, you should take care that the power cord will
not be damaged under the equipment.