Ricoh 270 All in One Printer User Manual


 
Copying
30
2
Basic Functions
The following basic functions are ex-
plained in this section.
Adjusting Copy Image Density
Auto and Manual Image Density
Selecting the Original Type
Text, Text·Photo, Photo
Selecting the Copy Paper
Auto Paper Select and Manual Pa-
per Select
Auto Reduce/Enlarge
The machine can choose an appro-
priate reproduction ratio based on
the paper and original sizes you se-
lect.
Note
You can select functions to be acti-
vated when System Reset is turned
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See
P.116
“1. General
Features 1/4”
.
You can change default settings for
basic functions. See
P.116
“Set-
tings You Can Change with the User
Tools”
.
Adjusting Copy Image Density
You can adjust the copy image densi-
ty to match your originals.
There are three ways to specify image
density:
Auto Image Density
The machine automatically adjusts
the image density.
Manual Image Density
If you require darker or lighter
copies, adjust the image density
yourself.
Combined Auto and Manual Image
Density
Use when copying originals with a
dirty background (such as news-
papers). You can adjust the fore-
ground density while leaving the
background unchanged.
Reference
You can change the density level
with the user tools. See “10. Text
Density” in
P.118
“1. General
Features 3/4”
.
A Select one of the Image Density
modes.
Auto Image Density
A Make sure that the Auto Image
Density indicator is lit.
Note
If it is not, press the
{
Auto Im-
age Density
}
key.
Manual Image Density
A Press the
{
Auto Image Density
}
key so the indicator goes out.