Filter
Top Products
Basic Operations When Using Scan to Folder
41
2
Note
❒ If you have selected more than one destination, you can press [UPrev.] or
[TNext] next to the destination field to scroll through the destinations.
❒ To cancel a selected destination, press [UPrev.] or [TNext] to display the
destination in the destination field, and then press the {Clear / Stop} key.
You can cancel a destination selected from the destination list by pressing
the selected destination again.
❒ If you press the {Check Modes} key before pressing the {Start} key, the ini-
tial scanner screen switches to the Check Modes screen. You can use the
Check Modes screen to check the settings such as destinations. For details,
see "Check Modes".
❒ To cancel scanning, press the {Clear / Stop} key or [Stop] on the display pan-
el.
❒ You can also store a file and simultaneously send it by Scan to Folder. For
details, see "Simultaneous Storage and Sending by Scan to Folder".
Reference
p.42 “Switching to the Scan to Folder Screen”
p.101 “Various Scan Settings”
p.112 “Setting for Scanning Sides of Originals”
p.114 “Setting of Original Feed Type”
p.124 “Setting File Type and File Name”
p.43 “Specifying Scan to Folder Destinations”
p.4 “Check Modes”
p.57 “Simultaneous Storage and Sending by Scan to Folder”