Filter
Top Products
Various Scan Settings
116
6
❒ When you specify Gray Scale for Scan Type, and single page TIFF/JPEG or
multi-page TIFF is selected as the file type, refer to the table below for how to
place originals. Originals placed in orientations that are not recommended in
the table might appear incorrectly top/bottom oriented on client computer
displays.
Batch, SADF
This section explains settings for scanning multiple originals in several batches.
To scan the originals as a single file, select [Batch].
To scan the originals individually in the ADF, select [SADF].
Important
❒ If the mode, [SADF] or [Batch], you want to select does not appear, change the
mode using [Switch to Batch] under [Scanner Features]. For details about [Switch
to Batch], see General Settings Guide.
•If you select [Batch], scanning starts as soon as you place the additional origi-
nals and press the {Start} key. When all the originals have been scanned, press
the {q} key. If you select [Batch], regardless of the default settings, the ma-
chine waits until additional originals are placed.
•If [SADF] is selected, scanning starts as soon as you place additional originals
in the ADF. Select which operation the machine performs while waiting for
additional originals in [Wait Time for Next Original(s): SADF] under [Scanner Fea-
tures]. For details about [Wait Time for Next Original(s): SADF], see General Set-
tings Guide.
A Press [Original Feed Type].
Placing an Original on the Exposure
Glass
Placing an Original in the ADF