Filter
Top Products
13
2. Faxing
Placing Originals
Some types of originals are unsuit-
able for the Auto Document Feeder
(ADF), so they must be placed on the
exposure glass or the ADF as shown
in the illustrations.
For details about original types and
how to set original sizes, see Copy Ref-
erence. You cannot use [Special Original
] under Copy Function. See “Placing
Originals”, Copy Reference.
Note that original sizes that can be au-
tomatically detected differ slightly to
those sizes listed in “Sizes Detectable
by Auto Paper Select”, Copy Reference.
See p.210 “Original sizes difficult to
detect”, Facsimile Reference <Advanced
Features> .
❖
❖❖
❖
How to place A4, B4 JIS (Japanese
Industrial Standard), A3, 8
1
/
2
"×
××
×11",
8
1
/
2
"×
××
×14", and 11"×
××
×17" size originals
❖
❖❖
❖
How to place A5 and B5 JIS size
originals
Note
❒
When you place originals as shown
in the above illustrations, the fax
header will be printed on received
faxes at the destination as follows:
• *1 On the top of the fax
• *2 On the left side of the fax
Reference
p.75 “Initial Settings and Adjust-
ments”
Limitation
❒ If you place A5 size documents on
the exposure glass, they will not be
detected. A5 size documents
placed in the ADF are sent. See
p.210 “Original sizes difficult to
detect”, Facsimile Reference <Ad-
vanced Features> .
JupterC2_Fax_EN-F_FM.book Page 13 Tuesday, November 30, 2004 2:47 PM