Filter
Top Products
Menu Settings
105
7
❖
❖❖
❖
5. Energy Level
You can specify the level of the Energy Saver mode. “Level 1” is the default
mode and save more power consumption than ”Level 2”.
• Level 1
• Level 2
❖
❖❖
❖
6. Transfer
You can specify the data transfer speed of the parallel interface. If you are
having trouble with data transfers, try changing this setting to “Normal”.
• Hi-speed
•Normal
Note
❒
This setting is effective only for "Parallel 1".
❖
❖❖
❖
7. Image Memory
This setting controls what the printer does when the printer memory is not
enough to print a certain page.
• Off
•On
“Off” causes the message shown below to be printed when there is not
enough memory to process.
Selecting “On” reduces the resolution of the image to reduce memory re-
quirements.
❖
❖❖
❖
8. Parallel 1
You can specify the parallel interface timing setting. Normally it is not neces-
sary to change this setting.
•ACK Inside
• ACK Outside
•STB Down
❖
❖❖
❖
9. Parallel IF2
You can specify the optional parallel interface timing setting. Normally it is
not necessary to change this setting.
• ACK Inside
• ACK Outside
•STB Down
Note
❒
Do not use the "ACK Outside" setting.