Filter
Top Products
55
6. Troubleshooting
Error & Status Messages
There are three types of error messages:
• Printed error message
• Displayed error message
• Getting Printer Information over the Network
Printed Error Message
The error message shown below is output by the printer whenever there is not
enough memory to print your data.
Error Message Required Action
There is not enough memory in your
printer to print this page. Change the res-
olution to 300 dpi in the printer driver and
try again. For details, please refer to the
troubleshooting section in your manual.
The following are the actions you should
take when you encounter memory short-
age problems. If these actions do not solve
the problem individually, try them in
combination with each other.
⇒
P.114
“Low Memory”
A
Increase printer memory.
Install the optional memory unit to in-
crease printer memory capacity.
⇒
P.11 “Installing the Memory Unit
(SIMM)”
B
Change the Color Level to [
1 bit
].
Use the printer driver to select [
Fast
] or
change the Color Level to [
1 bit
].
⇒
The printer driver online help
⇒
"RICOH-SCRIPT2 Operating In-
structions”
C
Reduce resolution.
Use the printer driver to set resolution
to 300 dpi.
⇒
The printer driver online help
⇒
"RICOH-SCRIPT2 Operating In-
structions”
D
Turn on "Image Memory".
Use the printer's "System Menu" to
turn on "Image Memory".
⇒
P.95
“Making Printer Settings with the Opera-
tion Panel”