Filter
Top Products
Installing the RICOH-SCRIPT2 Type305
13
2
Installing the RICOH-SCRIPT2 Type305
R
CAUTION:
Important
❒
The RICOH-SCRIPT2 can be dam-
aged by small amounts of static
electricity. Before touching it,
touch something metal to remove
static electricity from you.
Note
❒
For this printer, use only RICOH-
SCRIPT2 Type305.
A Check the contents of the box for
the following items.
• DIMM (Dual Inline Memory
Module)
• Installation Guide
• Operating Instructions
B Turn off the printer's power
switch and remove all cables and
cords from the printer.
C Remove screws and remove the
right back plate.
Note
❒
A coin can be used to remove
the screws.
D Make sure that the notch in the
module is on the right side. Tilt
the module to 30 degrees from
perpendicular to the slot and
slide it into the slot (A
AA
A). Then
push it in until it makes an audi-
ble click as it pops into place (B
BB
B).
E Attach the back plate to its origi-
nal position, and fasten it with
screws that were removed in step
C
CC
C.
Note
❒
A coin can be used to fasten the
screws.
F Plug the printer's power cord
back into the printer and the wall
socket. Turn on the printer's pow-
er switch.
•
Make sure to turn off the printer
and wait for about 30 minutes
before installing options. Not
waiting for the printer to cool
down can result in a burn.
TFWX197E
TFWX200E
TFWX205E