Placing Originals
17
1
A Press [Special Original].
B Select the original orientation ( or ), and then press [OK].
Note
❒ It is recommended to use this function together with the [Auto Paper Select]
or [Auto Reduce / Enlarge] function.
Placing Originals on the Exposure Glass
Place originals on the exposure glass.
Important
❒ Do not lift the exposure glass cover or ADF forcefully. Otherwise, the cover
of the ADF might open or be damaged.
A Lift the exposure glass cover or ADF.
Be sure to lift the exposure glass cover or ADF by more than 30 degrees. Oth-
erwise, the size of the original might not be detected correctly.
B Place the original face down on the exposure glass. The original should be
aligned to the rear left corner.
Start with the first page to be copied.
A Positioning mark
B Left scale
C Lower the exposure glass cover or ADF.
AQH010S
