Filter
Top Products
Copying
46
2
Changing the registered contents
Changes contents stored in colour balance programs.
A Press [Edit / Colour].
B Make sure that [Colour] is selected before pressing [Adjust Colour].
C Make sure that [Colour Balance] is selected before pressing [Program Colour
Balance].
D Make sure that [Recall] is selected, and then select the program number ([1]-
[3]) to be changed.
The programmed colour balance appears.
E Change the registered contents.
F After the programmed contents are changed, press [Program Colour Balance].
G Press [Program], and then press the program number to be overwritten.
H Press [Yes].
The program is overwritten.
I Press [OK] twice.
Copying with the registered contents
Applies settings registered in colour balance programs to the copy job.
A Press [Edit / Colour].
B Make sure that [Colour] is selected before pressing [Adjust Colour].
C Make sure that [Colour Balance] is selected before pressing [Program Colour
Balance].
D Make sure that [Recall] is selected, and then select the program number reg-
istered by the colour balance to be used.
E Press [OK] twice.