Filter
Top Products
Copier Functions
75
2
Note
❒ If you press [Suspend] after checking the results, return to step
A
to adjust
the copy settings as necessary. You can change the settings for Staple,
Punch, Duplex (1 sided → 2 sided, 2 sided → 2 sided), Copy Orientation,
Margin Adjust., Cover/Slip Sheet, Stamp, and Designate. However, de-
pending on the combination of functions, you may not be able to change
some settings.
Reference
See p.171 “Function Compatibility”.
Changing the number of sets
You can change the number of copy sets during copying.
Important
❒ This function can only be used when the Sort function is turned on.
A While “Copying...” is displayed, press the {Clear/Stop} key.
B Press [Change Quantity].
C Enter the number of copy sets with the number keys, and then press the
{q} key.
D Press [Continue].
Copying starts again.
Note
❒ The number of sets you can enter in step
C
differs depending on when the
{Clear/Stop} key is pressed.