Filter
Top Products
CABLES
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL
7
UltraView Pro Cables
(See Appendix C for cable part numbers)
UltraView Pro to KVM station cable
The KVM cable connects a keyboard, video monitor, and mouse to
the UltraView Pro. The KVM cable is configured with a DB25M
connector on one end and a connector for the keyboard, video, and
mouse cables on the other end. These KVM cable connectors
should be compatible with the types of connectors that are on your
KVM stations keyboard, monitor, and mouse cables.
UltraView Pro to CPU cables
A CPU cable is used to connect each computer to the UltraView
Pro. The CPU cable connects from the DB25F CPU ports on the
UltraView Pro to the keyboard, video, and mouse ports on each
CPU. This cable is configured with a DB25M connector on one end
and a connector for the keyboard, video, and mouse on the other
end. These CPU cable connectors should be compatible with each
CPUs keyboard, video, and mouse port.
UltraView Pro master to slave cables
In systems needing access to additional CPUs, the UltraView Pro
can be cascaded to other UltraView Pros. To cascade an UltraView
Pro to other “Slave” units, you will need one DB25M to DB25M,
switch-to-switch cable for each slave unit.
(Rose Electronics switch-to-switch cable part number
CAB-CXVSMMnnn.)