Filter
Top Products
16
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL
To change the scan time, highlight “Scan time” and press enter. An
input box will display for a new value. Enter the new scan time in
seconds and press enter. Valid entries are 1 to 999.
Scan mode
This value turns scanning on or off. To change this value, select
“Scan mode” and press enter. An input box will appear. Select
“On” or “Off” and hit enter.
Power on scan
Setting this value to “On” will enable scanning when the UltraView
Pro is powered on. To change this value, select “Power on scan”
and hit enter. Use the up/down arrow keys to select “OFF” or “ON”
and press enter.
Keyboard settings
The keyboard setting section of the configure system menu is used
to change the typematic rate and delay for PC keyboards and also
to set the language type for Sun keyboards.
Rate (keys/sec)
To change the rate value, highlight “Rate (keys/sec)” and press
enter. An input box will appear. Choose the rate value from Table 3
that represents the Rate keys/sec needed and press enter.
Rate
Keys/
Sec.
Rate
Value
Rate
Keys/
Sec.
Rate
Value
Rate
Keys/
Sec.
Rate
Value
Rate
Keys/
Sec
Rate
Value
30.0 31 15.0 23 7.5 15 3.7 7
26.7 30 13.3 22 6.7 14 3.3 6
24.0 29 12.0 21 6.0 13 3.0 5
21.8 28 10.9 20 5.5 12 2.7 4
20.0 27 10.0 19 5.0 11 2.5 3
18.5 26 9.2 18 4.6 10 2.3 2
17.1 25 8.6 17 4.3 9 2.1 1
16.0 24 8.0 16 4.0 8 2.0 0
Table 3. Typematic rate