Filter
Top Products
12 ULTRAVIEW REMOTE 2 INSTALLATION AND OPERATIONS MANUAL
To view the menu options press <CTRL> <ALT> <C>.
(if the standard hotkeys were altered on the Configure Unit screen, use the new hotkeys plus C)
Logoff
Select this option to close your current session and display the screensaver.
Restore mouse functions
Select this tab to revive a mouse that has ceased to function correctly. The UltraView Remote 2 provides a feature to
reinstate PS/2 mouse communications. (Does not apply if using a USB mouse.)
There are two main types of data formats used by current PC mice; ‘PS/2’ format and the more recent ‘IntelliMouse
®
’
format introduced by Microsoft. These use slightly different data arrangements and it is important to know which type
was being used before you hot-plugged the computer to the UltraView Remote 2. The previous setting depends both
on the type of mouse and the type of driver, as various combinations of PS/2 and IntelliMouse are possible. Using
the incorrect restore function may produce unpredictable results and require the computer to be re-booted.
Using a keyboard and monitor directly connected to the
UltraView Remote 2, log on and then press the hotkey
sequence <Ctrl> <Alt> <C> to view the options menu.
1. Select the ‘Restore mouse functions’ option to
display:
2. Select one of the following options:
3. Restore Standard Mouse – if PS/2 mode is required,
or Restore IntelliMouse – if IntelliMouse mode is
required.
4. Select “Back” to return to the Control menu.
Configuration
Select the “Configuration” tab to gain access to the Unit and Network configuration menus. You can also reset the
UltraView Remote 2 to its initial state.
Access mode
Allows you to choose between the Shared mode (where all other logged on users can see your operations) and the
Private mode (where the screens of all other users are blanked).
Host
Indicates the currently selected host computer and allows you to select others. This item will be blank unless host
details have been set-up.
Return to host
Quits the menu and returns to the host screen.