Filter
Top Products
24 ULTRAVIEW REMOTE 2 INSTALLATION AND OPERATIONS MANUAL
Sun Language
If the Sun keyboard type you are using is not a US Sun keyboard, the language can be changed to the correct
language keyboard. To change the language type, select “Sun Language” and press enter. A list box will display
showing the language choices available. Use the up/down arrow keys to select the correct Sun Keyboard language
and press enter.
The choices are:
US
Neth/Dutch
SWGerman
US Unix
Norwegian
UK
French
Portuguese
Korean
Danish
Spanish
Taiwan
German
Swed/Finn
Japan
Italian
SWFrench
FrCanadian
Configure computers
The “Configure computer” menu allows you to assign unique names to each computer and change the keyboard and
mouse type for each connected computer. Use the page up/down keys if there are more than 16 computers
connected in the system. (See Figure 14)
Figure 14. Configure computers
Computer name
The name of the connected computers can be changed from computer x to any name up to 16 valid ASCII
characters. Assigning a unique name to each computer gives you the ability to know what computer you are
connecting to without having to remember or use a cross-reference list.
To change the computer name, select the “Computer name” to change and press enter. An input box will display.
Enter the new computer name and press enter. It is recommended that the computer names entered are the same
as the names entered in the Host configuration section of the Input Module configuration. To change a computers
keyboard and/or mouse, use the up/down arrow keys to select (highlight) which computer to change the keyboard or
mouse. Use the left/right arrow keys to select either the keyboard or mouse to change and press enter.
A window will appear listing the keyboard or mouse types available. Use the up/down arrow keys and select the
correct keyboard or mouse type needed for the selected computer and press enter. The keyboard or mouse type will
change to the new type.
USB keyboards for PC and Sun computers are fully supported.
Save the changes when finished configuring each computer.
The keyboard and mouse selections for the connected computers are: