Filter
Top Products
SAM4s ER-5115 Electronic Cash Register Programming
101
Program 150 - PLU Group Assignment
Each PLU may report to any two of 21 groups. Group totals appear on reports, so that you can track
sales of different types of items. A group can also be used to designate items that are to print on an
optional kitchen printer.
Note: The PLU will report to group "0", if not programmed to report to groups 1-20.
1. Turn the control lock to the P position.
2. To begin the program, enter 1 5 0, press the SBTL key.
0 SBTL51
3. Select the PLU or PLUs you wish to program in one of the following ways:
Press a PLU key on the keyboard, or
PLU
Press multiple PLU keys that are to receive the same status, or
PLU PLU PLU PLU
Press a level key, then an PLU key, or
PLU
LEVEL
1/2/3
Enter the number of the PLU (1-1000) and press the PLU key, or
PLU
Enter the number (1-1000) of the first PLU in a range of PLUs that are to receive
the same setting; press the PLU key. Enter the last number (1-1000) in the range;
press the PLU key.
PLU PLU
4. Enter up to two 2-digit numbers representing the groups where you wish to add the
PLUs sales, i.e. enter 1 0 for group ten or enter 0 4 for group four. Press the X/TIME
key. Note that the 1
st
group assignment will also determine kitchen printer routing.
X/TIME
2
nd
Group 1
st
Group
(for KP routing)
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH