Filter
Top Products
64
Management Functions SAM4s ER-5115 Electronic Cash Register
Changing the Default PLU Level
The default level is the top, or surface level returned to after each PLU entry when options are set for
pop-up levels. For example, if levels are set to pop-up and default level is set to 2, after registering
an item in level 1 or level 3, subsequent registrations will automatically return to level 2.
To set default PLU level:
1. Turn the control lock to the X, or P key position
2. Press the desired level key twice to set that level as default.
LEVELLEVEL
Cash Declaration
If compulsory cash declaration is required, (see option #1, "System Option Programming" on page
108) you must declare the count of the cash drawer prior to taking X or Z financial and clerk reports.
You can enter the cash drawer total in one step, or to facilitate the counting of the cash drawer, you
can enter each type of bill/coin and checks separately and let the register act as an adding machine.
You can also use the X/TIME key to multiply the denomination of currency times your count.
Either way you choose to enter cash, the register will compare your declaration with the expected
cash and check in drawer totals and print the over or short amounts on the report.
For example:
1. Turn the control lock to the X or Z position
(depending upon the type of report you are taking.)
2. Press the CASH key.
CASH
3. Enter the total of cash.
8 7 6 CASH9
4. Enter the total of checks.
0 0 0 CHECK2
5. Press the CASH key to total the declaration.
CASH
DATE 08/15/2003 SUN
* CASH DECLARATION! *
CASH $98.76
CHECK $20.00
Total $118.76
CLERK 01 No.00001
TIME 12:00 00