Filter
Top Products
152
Programming SAM4s ER-5115 Electronic Cash Register
Group Status and Descriptor Programming
21 Group totals are available to accumulate totals of individual PLUs that are assigned to each group.
Each PLU can be assigned to one or two different groups. (See "Program 150 - PLU Group
Assignment" on page 101 to program PLU groups for each PLU.)
Use program 900 to assign a group status, i.e. a group can be set to not add to the total
of all groups, or a group can be used to designate like items for kitchen printer
assignment.
Use program 910 to assign a unique descriptor for each group, so that the group may be
easily understood on the group report.
Programming Group Status - Program 900
1. Turn the control lock to the P position.
2. To begin the program, enter 9 0 0, press the SBTL key.
0 SBTL09
3. Enter the number (1-20) of the group you wish to program; press the X/TIME key.
X/TIME
4. Enter an option digit from the table below, press the SBTL key.
OPTION VALUE = SUM
This group does not add to the group total? Yes = 1
No = 0
This group is a kitchen printer group? Yes = 2
No = 0
SBTL
5. To program additional groups, repeat from step 3, or press the CASH key to finalize the
program.
CASH