Filter
Top Products
SAM4s ER-5115 Electronic Cash Register Programming
153
Programming Group Descriptors
1. Turn the control lock to the P position.
2. To begin the program, enter 9 1 0, press the SBTL key.
0 SBTL19
3. Enter the number (1-20) of the group you wish to program; press the X/TIME key.
X/TIME
4. Refer to the "Descriptor Code Chart " on page 151 on and determine the codes for the
descriptor you wish to program. Enter up to 12 three-character codes; then press the
SBTL key. Repeat from step 3 to program additional group descriptors.
SBTL
Enter up to 12
three character
codes
5. To program additional groups, repeat from step 3, or press the CASH key to finalize the
program.
CASH