Filter
Top Products
154
Programming SAM4s ER-5115 Electronic Cash Register
Scale Tare Weight Programming
A tare is the amount of weight accounted for by the container or packaging. By entering a tare weight
(as required by law in some areas) the weight of the container is subtracted and only the true weight
of the product is measured on the scale. If you are using an optional scale you can pre-program up to
four standard tare weights. Tare #5 is reserved for manually entering tare weights. By using a tare,
you automatically subtract the container weight when a product is on the scale.
1. Turn the control lock to the P position.
2. To begin the program, enter 1 1 0 0, press the SBTL key.
0 SBTL011
3. Enter the number (1-4) of the tare you wish to program; press the X/TIME key.
X/TIME
4. Enter the weight of the tare (one digit preceding the decimal key, the decimal key, then
three digits after the decimal key). Press the SBTL key.
SBTL
.
5. To program additional tare weights, repeat from step 3, or press the CASH key to
finalize the program.
CASH