Filter
Top Products
SAM4s ER-5115 Electronic Cash Register Programming
91
Function Key Assignment Programming
Function keys may be relocated, inactivated or changed with this program. For example, you may
wish to place functions, such as PREVIOUS BALANCE and SERVICE, which are not placed on
the default keyboard. Or perhaps, you may wish to remove a function, such as CANCEL, for
security reasons.
Please note the following limitations:
If you assign a duplicate of a function code, the duplicate will function exactly as the
original - you will not get separate totals and counters on reports for the duplicated key.
You can reassign keys only in locations that are programmable. See "Keyboard" on
page 20, where the key locations that may be programmed are identified.
To Assign a Function Key to a Location:
1. Turn the control lock to the S position.
2. Enter 20, press the SBTL key.
02 SBTL
3. Refer to "Function Key Codes" on page 92 to find the code for the key you wish to
assign. Enter the code, press the location you wish to program, or press CASH to
cancel function key assignment programming.
Key
Location
Key Code
4. Repeat from step three for each key you wish to program, or press the same key to
finalize the program.
Same
Ke
y