Filter
Top Products
|
Handbook 149
To use the closed network function, follow the instructions
below.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The display
shows
1:FUNC. PROGRAMMING.
3 Press the Yes ᮤ key. The display shows
FUNCTION NO. [ ].
4 Using the numeric keypad, enter 08. The display shows
08:CLOSED NETWORK nnn
Where nnn is the current setting of this function.
The settings are: RX, T/R, or OFF
5 Press the No ᮣ key until the setting you want appears in
the display.
RX: limits reception only.
T/R: limits both transmission and reception.
OFF: no limits on transmission or reception.
6 Press the Yes ᮤ key to confirm the new setting.
7 Press the Select Function key to finish.