Filter
Top Products
Storing One-Touch & Speed Dial Numbers
Instead
of
manually
dialing
numbers, you can use either one-
touch keys or 2-digit speed dial
numbers
to quickly dial the
numbers that have been stored in
your unit’s memory. You can store
up to 40 telephone numbers of up
to 34 digits each and the
corresponding destination names
of up to 20 digits each, using 10
one-touch keys and 20 speed dial
numbers. Storing name is optional.
Storing Numbers for
One-Touch Dialing
You can store up to 20 telephone
numbers into 10 one-touch keys on your
unit. Because each one-touch key can
contain both a fax number and a
telephone number. The storing procedure
is slightly different for telephone vs. fax
numbers.
To begin storing numbers, press
[FUNCTION]. Follow the steps at right.
To Verify Your Stored Numbers
Print the location number list to
verify your one-touch telephone
and fax number entries and speed
dial telephone number entries (see
page 39).
Window Message
Your Response
Press one-touch key under which you want to assign the
number.
To store a telephone number, press [YES].
or,
To store a facsimile number, press [NO]. The unit displays
[XY:FAX ? (Y/N)], where [XY] is the one-touch key
number (01-10) selected. Press [YES].
If the window then says
[CANCEL
? (Y/N)],
a number is already
assigned to the one-touch key. Press [YES] to replace that
number and continue, or [NO] to start over with a different one-
touch key.
Enter the fax number or the telephone number you want to
store. You can use any key on the dial keypad, including
[*] and [#].
Pressing [REDIAL/PAUSE] between numbers adds a 2-
second pause each time it is pressed. Hyphen symbol
appears on the window at the pause entry.
If you make a mistake while entering a number, press
[NO] to backspace and correct.
When the correct number appears on the window, press
[YES].
If you want to identify the number with a destination name,
enter the desired name as described in “How to Enter
Name” on page 15.
When the desired name appears on the window, press
[YES].
or,
If you do not want to enter a name, just press [YES]
without entering name.
To use the memory search function, it is recommended to enter
name.
To store other numbers, repeat the steps from beginning.