Filter
Top Products
21
Starting NCE (Natural Color Expert)
Connecting the Calibrator
1. Connect the PC IN port on the product to a USB port on the PC using the USB cable.
2. Connect the calibrator to a USB port on the product.
NOTE
Install the driver (which is usually provided with a calibration program) provided by the calibrator
manufacturer rst before connecting the calibrator.
USB
(PC IN)
USB USB
3. The connected calibrator will automatically appear in the “Select a Calibrator” screen.
NOTE
If more than one calibrator is connected, select the desired calibrator in the “Select a Calibrator” screen.
Next, click “Next.”
Features of the NCE Program
Layout and Menu Items on the NCE Home
Screen
(Home)
NCE Profile List
Profile Information
Profile Name Mode
Target
UniformityPreference Edit Calibration Quit
New
Red (x,y)
Green (x,y)
Blue (x,y)
White (x,y)
: (0.6400, 0.3300)
: (0.3000, 0.6000)
: (0.1500, 0.0600)
: (0.2807, 0.2883)
: 1000 K
: 200 cd
: Skipped
: LUT/LUT/LUT
(0.6399, 0.3301)
(0.2996, 0.5999)
(0.1558, 0.0634)
(0.2809, 0.2885)
9967 K
199.8 cd
0.28 cd
LUT/LUT/LUT
White Point
Brightness
Black Level
RGB Gamma
Result
Last Update
Profile List
Color Mode shows the Color Mode setting of the monitor that corresponds with the Monitor Num. NCE Profile Lists are
monitor profiles saved in NCE SW. If they are applied after you have selected profile and completed Calibration, the value
you define will be saved in the Calibration Mode of the monitor OSD and the latest calibration value is used to set the color
specifications of the monitor. You can select Profile using Edit, and modify the Target at your own discretion. You can also
perform a Calibration. If there is no desired Target Profile, press "New" to create a new Profile.
1
7
2 3 4 5 6
1
Change the custom settings for the NCE program. Measure the current settings (COLOR,
Uniformity) of the monitor SB970.
2
Perform calibration for Uniformity to optimize the display uniformity of the monitor
SB970.
3
Create a prole using the option “New” if a prole for the target settings is not found in
the “NCE Prole List.” Also, calibrate the monitor SB970 and save the changed color
settings after calibration to the “NCE Prole List.”
4
Select a prole from the “NCE Prole List” to modify the target settings as desired and
perform calibration according to the modied settings.
5
Select a prole from the “NCE Prole List” and perform calibration according to the
settings of the selected prole.
6
Close the program.
7
A prole of settings changed after calibration has been saved to the “NCE Prole List”
as shown.
Using NCE (Natural Color Expert)