Filter
Top Products
26
6. Congure the Gamma settings. If you congure LUT, the gamma curve of sRGB will be
applied.
New Profile
(Standard)
Color Gamut - sRGB
Gamma
To set RGB gamma, drag and drop the control bar, press the left and right arrow buttons,
or enter a value in the text box manually. Check the results by looking at the Current image,
which the changes have been applied to. The accuracy of the preview shown in the Current
image can vary depending on the measurement results of Monitor Measurement. When you
have finished making changes press the Next button. To return to the previous step press
the Back button.
Before
Linear Gray
Red Green Blue
Back Calibration Cancel
Deep Black
After
Brightness - 150 cd
Black Level - Min.
White Point - 6504 K
RGB Gamma
7. Start calibration.
Initialize
Place a Calibrator
Connect Calibrator. The Connected Calibrator automatically appears in Select a Calibrator.
If several calibrators are connected, then select a calibrator by going to Select a Calibrator
and pressing Next.
Measuring
Result
Measurement
Connect a Calibrator
Calibrator
Monitor
Select a Calibrator
Next CancelBack
PC
Advanced
1. You can perform basic conguration using a single menu screen.
Edit
You can adjust the Brightness, Black Level, White Point, and Gamma value. Pressing Preview will show you
how your changes will affect the image. The accuracy of the Preview image may vary, depending on the Monitor
Measurement result. When you are happy with your changes, press the Calibration button.
Edit Target Result
Color Gamut
Brightness
Black Level
Set Black Level Control
White Point
RGB Gamma
CancelCalibration
Red Green Blue
Standard
Preview
Max.
Min.
[Calibration]
sRGB
R(0.6400, 0.3300)
G(0.3000, 0.6000)
B(0.1500, 0.0600)
2. Start calibration.
Calibration
Calibrator
Select a Calibrator
Calibration device not found
Back Next Cancel
Connect a Calibrator
Initialize
Place a Calibrator
Connect Calibrator. The Connected Calibrator automatically appears in Select a Calibrator.
If several calibrators are connected, then select a calibrator by going to Select a Calibrator
and pressing Next.
Calibrating
Result
Using NCE (Natural Color Expert)