Filter
Top Products
23
Layout and Menu Items on the Uniformity
Screen
Only Brightness
Brightness + Color
Auto setting
User Settings
Back Next
Uniformity
Uniformity Correction
The options available for Uniformity implementation will be provided in the Uniformity window (this will open as a new
window).There are three options for Uniformity calibration. 1. Local block number selection 2. Color or Brightness selection
for uniformity correction 3. Target setting ( x, y, Y ) The NUC calibration window is displayed according to the window type
that has been selected in the NUC selected window. 1. If 5X3 has been selected, the screen divided into 5 rows and 3
columns.2. If 5X5 has been selected, the screen is divided into 5 rows and 5 columns. 3. If 7X7 has been selected, the
screen is divided into 7 rows and 7 columns. 4. The Place Calibrator image is displayed in the centre. 5. The message
‘Press ESC to cancel’ is displayed in the bottom right section. 6. The message ‘Press Enter to continue’ is displayed in the
bottom right section.
1
Specify the number of blocks that will be displayed on the screen when Uniformity
calibration is carried out. A greater number of blocks will increase the precision of
uniformity calibration.
2
Select Only Brightness to perform calibration only for the brightness. Select
Brightness + Color to perform calibration for both the brightness and colors. If
you select Brightness + Color, the color temperature uniformity will also increase
from calibration.
3
Specify the color temperature when performing calibration. To obtain a more
accurate color temperature, performing Uniformity calibration before color
calibration is recommended.
Layout and Menu Items on the Edit Screen
If proles exist in the "NCE Prole List,” you can select a prole, modify the target settings
as desired, and perform calibration according to the modied settings.
Edit
You can adjust the Brightness, Black Level, White Point, and Gamma value. Pressing Preview will show you
how your changes will affect the image. The accuracy of the Preview image may vary, depending on the Monitor
Measurement result. When you are happy with your changes, press the Calibration button.
Edit Target Result
Color Gamut
Brightness
Black Level
Set Black Level Control
White Point
RGB Gamma
CancelCalibration
Red Green Blue
Standard
Preview
Max.
Min.
[Calibration]
sRGB
R(0.6400, 0.3300)
G(0.3000, 0.6000)
B(0.1500, 0.0600)
1. Select a prole from the "NCE Prole List.”
2. Click the "Edit” button to change the settings.
3. After changing the settings as desired, click the “Calibration” button.
Using NCE (Natural Color Expert)