Filter
Top Products
7
Cleaning
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the product.
2. Remove the power cable from the product.
NOTE
Hold the power cable by the plug and do not touch the cable with wet hands.
Otherwise, an electric shock may result.
!
3. Wipe the product screen using a clean, soft and dry cloth.
-
Do not use detergents that contain alcohol, solvent or surface-active
agents.
-
Do not spray water or detergent directly on the product.
4. To clean the exterior of the product, use a moist soft cloth and wring
thoroughly before wiping the exterior.
5. After cleaning the product, connect the power cable to the product.
6. Power on the product to use it.
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Warning
Do not use a damaged power cable or plug, or a loose power socket.
-
An electric shock or re may result.
Do not use multiple products with a single power socket.
-
Otherwise, the socket may cause a re.
Do not touch the power cable with wet hands.
Otherwise, an electric shock may result.
!
Insert the power cable all the way in so it is not loose.
-
An unsecure connection may cause a re.
!
Be sure to plug the power cable into a grounded power socket. (type 1
insulated devices only).
-
An electric shock or injury may result.
Before Using the Product