Filter
Top Products
U
SING YOUR PRINTER WITH MACINTOSH
C.3
If you have a printer with 10/100Base-TX network interface
card installed (standard for ML-6060S and ML-6060N, option
for ML-6060), you can connect to an Ethernet network. Use
a Category 5 twisted pair cable with RJ-45 connectors for
10/100Base-T Ethernet.
1
Plug one end of the network cable into the twisted-pair
connector on the back of the printer.
2
Connect the other end to the network hub.
Network Connection
Macintosh Installation
Note: You must configure your printer for the network.
For information about configuring your printer,
refer to the Network User’s Guide.