Filter
Top Products
U
SING WINDOWS POSTSCRIPT DRIVER
E.1
Setting Your Printer with the PS Option
If you want to use the PostScript driver to print a document, your
printer should have:
• PS SIMM (Option for ML-6060 and ML-6060N. ML-6060S comes
with a built-in PS SIMM.)
• 12 MB or more RAM. ML-6060 comes with 4 MB RAM, so
additional 8 MB or more RAM should be added. (ML-6060N and
ML-6060S come with 16 MB RAM, so additional RAM is not
required.)
For instructions on installing the printer options, see Appendix H,
“Printer Options.”
Installing PPD Files
PPDs, in combination with the PostScript driver, access the printer
features and allow the computer to communicate with the printer.
An installation program for the PPDs is provided on the ML-6060
CD-ROM.
Notes:
•
Installing the PostScript printer driver may require the use of the
operating system files on the original CD-ROM or diskette that
came with your system.
•
If you have a PostScript level 3 driver and want to use it, you
must install the PostScript level 3 PPD which is also provided on
the ML-6060 series CD-ROM.
1
Before installing PPD files, make sure that the printer and
the PC are properly connected with parallel, USB, or optional
network interface. For information on:
• Connecting with parallel interface, see page 2.7.
• Connecting with an USB interface, see Appendix B, “Using
Your Printer with a USB Cable.” To use the USB interface, you
must also install the USB port driver.
• Connecting with an optional network interface, see Appendix
F, “Using Your Printer on a Network.”