Filter
Top Products
S
ETTING UP YOUR PRINTER
2.7
1
Make sure both the printer and the
computer are turned off.
2
Plug the parallel printer cable into the
connector on the back of the printer.
Push the metal clips down to fit inside
the notches on the cable plug.
3
Connect the other end of the cable to
the parallel interface port on your
computer, and tighten the screws.
See your computer documentation if
you need help.
Connect to the Computer
with a Parallel Cable
➞ To the parallel
port on PC
If you are using a USB interface
Go to Appendix B, “Using Your Printer with a USB
Cable.”
If you are using an optional network interface
Go to Appendix F, “Using Your Printer on Network.”
Note: ML-6060N and ML-6060S come with a built-in
network interface.