Filter
Top Products
P
RINTER OPTIONS
H.2
Memory and PostScript SIMMs
Additional printer memory and the PostScript option are provided on SIMMs (single in-line
memory modules). This procedure is applicable to either option.
Notes:
• Since PostScript setting requires 12 MB of printer memory and the ML-6060 comes with
4 MB standard, installation of the PS SIMM requires installation of a 8 MB SIMM memory as
well.
• ML-6060S comes with the PS SIMM and 16 MB RAM standard.
• ML-6060N has 16 MB RAM standard, so additional memory is not required to install option PS
SIMM.
1
Turn the printer power off and unplug
all cables from the printer.
2
Remove the two screws on the rear of
the printer, then remove the control
board cover.