Sanyo PLC-WL2503A Projector User Manual


  Open as PDF
of 78
 
30
AutoPCadjustmentfunctionisprovidedtoautomaticallyadjustFine sync,Total dots,Horizontal,Vertical
positiontoconformtoyourcomputer.
PC adjust Menu
Auto PC adjustment
To store adjustment parameters
TheadjustedparametersfromtheAutoPCadjustmentcan
bestoredintheprojector.Oncetheparametersarestored,
thesettingcanbedonejustbyselectingaMode (1-10)in
thePCSystemMenu(seepage29).Seealso“Store”on
page32.
Note:
•Fine sync,Total dots,HorizontalandVertical
positionofsomecomputerscannotbefullyadjusted
withtheAutoPCadjustmentfunction.Whentheimage
isnotprovidedproperlywiththisoperation,manual
adjustmentsarerequired(pp.31-32).
•TheAutoPCadjustmentcannotbeoperatedwhen
480i,575i,480p,575p,720p,1035ior1080iisselected
inthePCSystemMenu(p.29),orwhenthesignalis
comingfromtheHDMIterminal.
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectPC adjust
andthenpressthePoint►ortheSELECTbutton.
1
2
UsethePoint▲▼buttonstoselectAuto PC adj.and
thenpresstheSELECTbutton.
Auto PC adj.
UsePoint▲▼buttonstoselectAuto PC
adj. andpresstheSELECTbutton.
Please wait...appearswhiletheAutoPC
adjustmentisinprocess.
Computer Input
Menu Operation
 previous next