Sanyo PLC-WL2503A Projector User Manual


 
70
Checktheindicatorsforprojectorcondition.
•••green. •••red •••off
•••blinksgreen.
Whentheprojectionlampreachesitsendoflife,theLAMPREPLACEindicatorlightsyellow.Whenthis
indicatorlightsyellow,replacetheprojectionlampwithanewonepromptly.
Theprojectorisoff.(TheACpowercordisunplugged.)
Theprojectorisinstand-bymode.PresstheON/STAND-BYbutton
toturnontheprojector.
Projector Condition
POWER
red/green
Indicators
LAMP
REPLACE
yellow
WARNING
red
Theprojectorispreparingforstand-byortheprojectionlampis
beingcooleddown.Theprojectorcannotbeturnedonuntilcooling
iscompletedandthePOWERindicatorstopsblinking.
Thetemperatureinsidetheprojectorisabnormallyhigh.The
projectorcannotbeturnedon.Whentheprojectoriscooled
downenoughandthetemperaturereturnstonormal,thePOWER
indicatorstopsblinkingandtheprojectorcanbeturnedon.(The
WARNINGindicatorkeepsblinking.)
Theprojectordetectsanabnormalconditionandcannotbeturned
on.UnplugtheACpowercordandplugitagaintoturnonthe
projector.Iftheprojectoristurnedoffagain,unplugtheACpower
cordandcontactthedealerortheservicecenterforserviceand
checkup.Donotleavetheprojectoron.Itmaycauseanelectric
shockorafirehazard.
Theprojectorisoperatingnormally.
TheprojectorisinthePowermanagementmode.
Theprojectorhasbeencooleddownenoughandthetemperature
returnstonormal.Whenturningontheprojector,theWARNING
indicatorstopsblinking.
Indicators and Projector Condition
•••blinksred.
Appendix