Sanyo PLC-WL2503A Projector User Manual


  Open as PDF
of 78
 
61
BesuretoresettheFiltercounterafterreplacingtheFilter.
Resetting the Filter Counter
Maintenance and Cleaning
Turnofftheprojector,andunplugtheACpowercord
fromtheACoutlet.
First,cleanupthedustontheprojectorandaroundthe
airvents.
1
2
Filterpreventsdustfromaccumulatingontheopticalelementsinsidetheprojector.ShouldtheFilterbecome
cloggedwithdustparticles,itwillreducecoolingfans’effectivenessandmayresultininternalheatbuildup
andadverselyaffectthelifeoftheprojector.Ifa“Filterwarning”iconappearsonthescreen,replacetheFilter
immediately.Replacethefilterbyfollowingthestepsbelow.
Pressandholdanypartoftheredcircle,andthen
press◄leftwardsonthefiltercovertoreleasethe
latchandopenthefiltercover.
3
Pulloutthefilter.Whentakingoutthefilter,putyour
fingersonthefiltertabandthenpull.
4
CAUTION
Donotoperatetheprojectorwiththefilterremoved.
Dustmayaccumulateontheopticalelements
degradingpicturequality.
Donotputanythingintotheairvents.Doingsomay
resultinmalfunctionoftheprojector.
Donotwashthefilterwithwateroranyotherliquid
matter.Otherwisethefiltermaybedamaged.
RECOMMENDATION
We recommend avoiding dusty/smoky environments
when you operate the projector. Usage in these
environments may cause poor image quality.
Whenusingtheprojectorunderdustyorsmokyconditions,
dustmayaccumulateonalens,LCDpanels,oroptical
elementsinsidetheprojectordegradingthequalityofa
projectedimage.Whenthesymptomsabovearenoticed,
contactyourauthorizeddealerorservicecenterforproper
cleaning.
Replacing the Filter
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectSettingand
thenpressthePoint►ortheSELECTbutton.
UsethePoint▲▼buttonstoselectFilter counter
andthenpresstheSELECTbutton.UsethePoint▲▼
buttonstoselectFilter counter resetandthenpress
theSELECTbutton.Filter counter Reset? appears.
SelectYestocontinue.
1
2
Filter counter
Filter counter Reset?
appears.
SelectYes,thenanother
confirmationboxappears.
SelectYesagaintoreset
theFiltercounter.
Anotherconfirmationdialogboxappears,selectYesto
resettheFiltercounter.
3
Latch
Pulloutand
remove.
Insertthenewfiltercompletelyandreplacethe
filtercover.Ensurethattheareawith“TOP”markis
inanupwarddirection.
5
ConnecttheACpowercordtotheprojectorandturn
ontheprojector.
6
Resetthefiltercounter.
7
TOPmark
Filtercover
 previous next