Sanyo PLC-WL2503A Projector User Manual


  Open as PDF
of 78
 
39
Video System Selection
1
AV System Menu (Video or S-video)
AV System Menu (Component)
2
If the projector can not reproduce proper video image,
selectaspecificbroadcastsignalformatfromamongPAL,
SECAM,NTSC,NTSC 4.43,PAL-M,andPAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming video
signal,andadjustsitselftooptimizeitsperformance.
Iftheprojectorcannotreproducepropervideoimage,select
aspecificcomponentvideosignalformatfromamong480i,
575i,480p,575p,720p,1035i,and1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
The projector automatically detects an incoming video
system,and adjusts itself tooptimize itsperformance.
WhenVideoSystemisPAL-MorPAL-N,selectthesystem
manually.
Auto
Note:
TheAVSystemMenucannotbeselectedwhenselecting
RGB (Scart) or HDMI.
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectInputand
thenpressthePoint►ortheSELECTbutton.
UsethePoint▲▼buttonstoselectVideoorS-video
orComputer 1(Component)andthenpressthe
SELECTbutton.
3
UsethePoint▲▼buttonstoselectSystemandthen
pressthePoint► ortheSELECTbutton.Usethe
Point▲▼buttonstoselectthedesiredsystemand
thenpresstheSELECTbutton.
Video Input
Component
Video or S-video
 previous next