Sanyo PLC-WL2503A Projector User Manual


 
32
Store
Tostoretheadjusteddata,selectStoreandthenpressthe
PointortheSELECTbutton.Movethehighlighttoone
oftheModes1to10inwhichyouwanttostore,andthen
presstheSELECTbutton.
Mode free
Toclearthestoreddata,selectMode freeandthenpress
thePointortheSELECTbutton.Movethehighlighttothe
ModethatyouwanttoclearandthenpresstheSELECT
button.
Note:
•Display area (H/V) cannotbeselectedwhen480i,
575i,480p,575p,720p,1035i,or1080iisselectedin
thePCSystemMenu(p.29).
•Wheninputcomputersignaltotheprojector,PC adjust
willbecomeavailable.
Reset
To resetthe adjusteddata,select Resetand press the
SELECTbutton.Aconfirmationboxappearsandthenselect
Yes.Alladjustmentswillreturntotheirpreviousfigures.
ThisModehasstored
parameters.
ValuesofTotal dots,Horizontal,
Vertical,Display area H,and
Display area V.
Computer Input
Mode free Menu
Vacant
PressSELECTbuttonto
storeadjusteddata.
PressMENUbutton
toclosethisdialog
box.
Store Menu