Filter
Top Products
12
Part Names and Functions
!0 R/C JACK
When using the wired remote control, connect the
wired remote control to this jack with a remote
control cable (optional).
!2 MONITOR OUTPUT TERMINAL (ANALOG)
This terminal outputs the video signal from
computer to external video equipment. (See page
✽ RESET button
A built-in micro processor which controls this unit may
occasionally malfunction and need to be reset. This can be
done by pressing the RESET button with a pen, which will
shut down and restart the unit. Do not use the RESET
function excessively.
Rear Terminal
!0!1!2!3!4
✽
!1 AUDIO MONITOR OUTPUT JACK
This jack outputs the audio signal from computer
or video equipment to external audio equipment.
(See page
!3 CONTROL PORT CONNECTOR
When controlling a computer with the remote
control of the projector, connect the mouse port of
your computer to this connector. (See page 13.)
!4 Infrared Remote Reciever (Back)
The infrared remote reciever is also located in the
front. (See page .)