Sanyo PLC-XT25 Projector User Manual


 
41
Computer Adjustment
Use the Point 7 8 buttons to adjust the horizontal area
displayed by this projector.
Display area H
Use the Point 7 8 buttons to adjust the vertical area
displayed by this projector.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Mode 1 to 5 in which you want to store, and then press the
SELECT button.
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Mode free
Vacant Values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and
“Display area V.”
Close this dialog box.
To clear the stored data, select Mode free and then press
the SELECT button. Move the red arrow pointer to the
Mode that you want to clear and then press the SELECT
button.
Notes:
•Display area (H/V) cannot be selected when 480i, 575i, 480p,
575p, 720p, 1035i, or 1080i is selected in the PC System Menu.
(p.31)
•PC Adjust Menu cannot be selected when Computer 1(Digital) is
selected in the Input Menu. (p.30)
Move the red framed pointer
to the desired item and press
the SELECT button.
To clear the adjusted data
This Mode has the
stored parameters .
To store the adjusted data