Filter
Top Products
61
Setting
The PIN code can be changed to your desired four-digit
number.
Press the Point d buttons to select “PIN code change”
and press the SELECT button. The New PIN code input
dialog box appears. Set a new PIN code.
Change the PIN code
Change the PIN code
CAUTION:
WHEN YOU HAVE CHANGED THE PIN
CODE, WRITE DOWN THE NEW PIN
CODE IN COLUMN OF THE PIN CODE NO.
MEMO ON PAGE 70, AND KEEP IT
SECURELY. IF YOU FORGET YOUR PIN
CODE, THE PROJECTOR CAN NO
LONGER BE STARTED.
Test pattern
Various test pattern are available for use when setting up
the projector.
Warning log
This function records anomalous operations during the
projector is in operation and use it when diagnosing faults.
Up to 10 warning logs are displayed with the latest warning
message at the top of the list, followed by previous warning
messages in chronological order.
This function is used to reset the lamp counter.
When the lamp life is left less than 100 hours, the Lamp
replacement icon appears on the screen, indicating that the
end of lamp life is approaching.
When replacing the projection lamp, reset the lamp counter.
See page 59 for operation.
Lamp counter
✔Note:
•When the Factory default function is executed, all the warning log
records will be deleted.
This icon appears on the screen when the end of
lamp life is approaching.