Filter
Top Products
6
Safety Instructions
Openings in the cabinet are provided for ventilation.
To ensure reliable operation of the product and to
protect it from overheating, these openings must not
be blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken.
– Do not put any flammable object or spray can near
the projector, hot air is exhausted from the
ventilation holes.
– Keep the exhaust vent at least 3’ (1 m) away from
any objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on
the cabinet will not only get damaged but also
cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
Air Circulation
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Air flow
The projector uses a lamp which generates an intense
heat. The cooling fans and air vents are provided to
dissipate the heart and the filter is located in the
intake vent to prevent dust from getting inside of the
projector.
In order to use the projector for many years to come,
regular cleaning is required. Remove any dirt or dust
that has accumulated on the projector and filter. For
maintenance of the filter, refer to the Filter counter
function on page 64.
Blocking up the air vents and leaving the projector
uncleaned for a long time will not only damage the
projector but also cause accidents or fire, or may
require costly repairs.
Follow the instructions described in this manual for
cleaning and maintenance of the filter.
Using unclearned filter for an extended period of
time or accidental breakage caused by improper
maintenance are not covered by the warranty.
IMPORTANT!
Clean the Filter Regularly!!