Filter
Top Products
74
Appendix
*When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights
yellow, replace the projection lamp with a new one promptly. Reset the lamp counter after replacing the lamp. See page
58–59.
The filter is clogged with dust or has been used overtime. Clean or
replace the filter immediately
The filter has been used overtime. Clean or replace the filter
immediately.
Projector Condition
POWER
green
Indicators
WARNING
FILTER
orange
LAMP
red
WARNING FILTER indicator
The lamp cannot light up. (The projector is preparing for stand-by or
the projection lamp is being cooled down. The projector cannot be
turned on until cooling is completed.)
The lamp cannot light up. (The lamp has been cooled down enough
and the projector is in stand-by mode and ready to be turned on with
the POWER ON-OFF button.)
Projector Condition
POWER
green
Indicators
LAMP
REPLACE
yellow
LAMP
red
LAMP REPLACE indicator
The lamp has been used overtime. Replace the lamp immediately
and then reset the lamp counter. The indicator will be turned off
after resetting the counter.