Filter
Top Products
32
Basic Operation
black out ➜ the captured image ➜ normal ➜
• • • • •
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When the projected
image is captured and set as “User” in the Logo selection
(p.48), the screen changes as follows each time you press
the NO SHOW button.
“No show” disappears after 4 seconds.
NO SHOW button
Press the P-TIMER button on the remote control. The
countdown timer “00:00” appears on the screen and the
countdown starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. Press
the P-TIMER button again to cancel the P-timer function.
P-TIMER button
Countdown timer
✔Note:
•See the previous page for the description of
other buttons.
Remote Control
NO SHOW
button
P-TIMER
button
Press the KEYSTONE button on the remote control. The
“Keystone” appears on the screen.
Use the Point ed buttons to correct keystone distortion.
The keystone adjustment can be stored. (p.47)
•The arrows are white when there is no correction.
•The direction of the arrow being corrected turns red.
•The arrows disappear at the maximum correction.
•If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
Reduce the upper width
with the Point
e button.
Reduce the lower width
with the Point
d button.
KEYSTONE button
KEYSTONE
button