Filter
Top Products
62
Setting
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, and the lamp
counter to the factory default settings.
Exit the Setting Menu.
Quit
Select Factory default and this
box appears. Select [Yes], and
the next box appears.
Select [Yes] to
activate it.
Factory default
This function is used to set the timing for the filter cleaning.
When the projector reaches a specified time, the Filter
warning icon appears on the screen and the WARNING
FILTER indicator blinks orange, notifying the cleaning is
necessary. After cleaning the filter, be sure to select RESET
and set the timer. The WARNING FILTER indicator and
Filter warning icon will not be turned off until the filter
counter is reset.
If filter clogging is detected during operations, the Filter
warning icon appears on the screen and the WARNING
FILTER indicator lights orange urging you to clean or replace
the filter. The WARNING FILTER indicator and Filter
warning icon will not be turned off until the filter is cleaned
or replaced by a new one.
For details about setting the timer, refer to “Maintenance
and Filter Cleaning” on page 62.
Filter counter
Filter counter
Use the Point 7 8 buttons to
set the timer. Select from
(Off/100H/200H/300H).
Filter warning icon appears on the screen when
the filter is due for cleaning or when clogging is
detected during operations.