Filter
Top Products
26
Basic Operation
Press the ON/STAND-BY button on the top control or
the STAND-BY button on the remote control, and
“Power off?” appears on the screen.
Press the ON/STAND-BY button or the STAND-BY
button on the remote control again to turn off the
projector. The LAMP indicator turns off and the POWER
indicator blinks green. After the projector is turned off,
the cooling fans operates for 90 seconds. During the
POWER indicator is blinking green, you cannot turn on
the projector.
1
2
TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT LEAST
FIVE MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
THE COOLING FANS ARE RUNNING OR BEFORE
THE POWER INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING
THE LAMP LIFE.
3
When the projector has cooled down enough, the
POWER indicator lights green again and you can turn
on the projector. After it is cooled down completely,
unplug the AC power cord.
“Power off” disappears after 4 seconds.
✔Notes:
•When the On start function is on, this projector will be turned on
automatically by connecting the AC power cord to an AC outlet
(p.51).
•Do not operate the projector continuously without rest. Continuous
use may result in shortening the lamp life. Turn off the projector
and let stand for about an hour in every 24 hours.
•The running speed of cooling fans is changed according to the
temperature inside the projector.
•Do not put the projector in a case before the projector is cooled
enough.
•If the WARNING indicator blinks or lights red, see “Warning
Indicator” on page 55.
•While the POWER indicator is blinking, the lamp is being cooled
down and the projector cannot be turned on. Wait until the
POWER indicator becomes red to be turned on again.
Tu r ning Off the Projector