Sanyo PLV-Z1X Projector User Manual


 
12
Part Names and Functions
To insure safe operation, please observe the following precautions :
Use (2) AA, UM3 or LR06 type alkaline batteries.
Replace two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contact with water or liquid.
Do not expose the remote control to moisture, or heat.
Do not drop the remote control.
If a battery has leaked on remote control, carefully wipe case clean and install new batteries.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Point the remote control toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum operat-
ing range for the remote control is about 16.4’ (5m) and 60° in front of the projector.
16.4’
(5 m)
60°
Remote Control Batteries Installation
Remote Control Operating Range
Pull up the lid and
remove it.
Remove the battery
compartment lid.
Slide the batteries
into compartment.
Replace the compartment lid.
Two AA size ALKALINE
batteries
For correct polarity (+ and
–), be sure battery termi-
nals are in contact with
pins in compartment.
12 3